HOW TO MEASURE
The proper size cover is necessary to get optimum performance from your new cover. Try to pick the smallest size that will meet or exceed the measurements you have taken. Make sure you get covers that are bigger than your dimensions otherwise you won't be able to get them on and off.
If your cover is too large, it will sag, allowing water to accumulate. KoverRoos® are designed to channel water off of your cover, but if the cover is too large there will not be enough tension for this design to work effectively.
If your cover is too tight, the places some areas may stretch out and deteriorate prematurely. Properly fitted covers will last longer than those that are either too tight or much too loose, so KoverRoos® recommends taking the time to measure before ordering.
Dining Sets (Table and Chairs)
- Put all your chairs around your patio table in their normal positions.
- Measure from the chair back at one end of the table to the chair back farthest away across the table. This is the diameter of the cover. This diameter will be significantly larger than your table measurement alone.
- Measure the tallest chair's back height from the ground. A 'high back chair' is any chair with a back taller than 35".
- Choose the cover that is the same size or slightly larger than the width you measured, with a 'skirt' length that is 2" to 6" shorter than your chair back measurement to allow ground clearance.
| KoverRoos® sizes | Fit Table and Chair Seat sizes |
|---|---|
| 82" diameter | Round and Square table and chair sets with tables up to 50" |
| 108" diameter | Round and Square table and chair sets with tables up to 78" |
| 108" X 82" | Oval or Rectangular table and chair sets with tables up to 78" X 48" |
| 132" X 74" | Oval or Rectangular table and chair sets with tables up to 102" X 40" |
| Note: | 28" height is appropriate for most sets with 'low back' chairs (i.e. chairs less than 35" high) |
| 88" diameter | Round and Square table and high back chair sets with tables up to 54" |
| 114" diameter | Round and Square table and high back chair sets with tables up to 78" |
| 112" X 88" | Oval or Rectangular table and high back chair sets with tables up to 78" X 48" |
| 140" X 80" | Oval or Rectangular table and high back chair sets with tables up to 102" X 40" |
| Note: | The 36" height is appropriate for most sets with 'high back' chairs (i.e. chairs that are 25" high or taller). |
Seating
Measure the chair back's height from the ground. A 'high back chair' is any chair with a back taller than 35"; anything under 35" is a 'low back chair.'
Ottomans and Small Tables
Grills and Smokers
Measure the grill back's height from the ground up to the height of the hood, and measure the grill front's height from the ground. Then measure the length and width of the grill itself.
Firepits
